DUE TO DELAYS IN SHIPMENTS FROM THE MANUFACTURER, WE ARE UNABLE TO TAKE ANY NEW ORDERS UNTIL CURRENT ORDERS ARE FULFILLED. PLEASE CHECK BACK JUNE 15.
The Catalina offers you a high quality steel wall pool at a very economical price! The manufacturer uses a sealant on the components of the pool to allow long term durability and strength. The design of this pool successfully blends a beautiful arctic-grey pool frame with a dynamic gray and blue painter’s brush-stroke pattern to create a pool designed to fit any backyard. Steel top rails and verticals provide strength and flexibility for many years of famiily fun. This is a great alternative to our Sandstone pool.
Only available in Round sizes.
- Beautifully crafted 6” steel top rails and 5” steel verticals in a silver-tone.
- 52” Steel pool wall .
- 25 mil Blue Overlap liner
- Steel bottom track and top rim
- 20 Year Manufacturer Warranty - 1 year full
- Staggered bolt wall closure provides maximum strength and wall stability.
- Corrugated pool wall for flexibility and vertical strength.
- Wide mouth skimmer knockout and eyeball return openings eliminate sharp edges that could cut the liner during installation.
- Made in the USA.
A week to 10 days before beginning installation you need to verify you have all your parts. All pool boxes should be opened and compared to the packing list to verify nothing is missing or damaged. Parts list are included on the CD in your pool box, the packing list within each box and are listed in this section.
You can contact an installer in your area or install the pool yourself. However, if you are considering installing the pool yourself, please review both the manual instructions and installation video in this section. We do not offer installation or installation advice, you are purchasing the kit only.
You can connect all the hoses and unions that come with your system (seen below) or you can hard plumb the system (in the next section).
To hard plumb your pump and filter system you will need to purchase some items from a local hardware store:
- PVC pipe
- Elbow joints
- Flow-thru valves
You will need to cut the PVC pipe to fit between the parts, and then make the connections as shown below.
To install your overlap liner follow the directions that came in your liner box, use the directions below as a reference.
Use the directions that come in your liner box and in your pool instructions, use the instructions below as a reference.
If you are using a unibead liner, these liners can be hooked on the wall or you can remove the J portion on the top of the liner and then feed the bead that is on the liner into the bead receiver. We do not sell bead receivers. Also, if you are installing a replacment liner make sure your bead receiver is in good condition or the liner could slip out when the water is added.
When your liner is installed, you need to fill the pool with 1-2 feet of water before cutting installing your skimmer and return. In addtion you do not want to cut the hole in the liner until the skimmer plate and backside are installed and you cut on the inside of the skimmer.
Once your pool is filled for the first time or you finish adding water when you open your pool in the spring, you can take a water sample to a local pool store and get them to test your water and tell you what you need to add or you can use the test kit that was provided to determine what needs to be added before you start your chemical maintenance program. All water should be checked and balanced before any chlorine or salt is added.
You will need a closing chemical kit and a winter cover.
OVAL installation video
ROUND installation video
Pre-assembly for TRADITIONAL BUTTRESS supports
Pre-assembly for BUTTRESS-FREE supports