Diamond Star - Saltwater Friendly <br>(IN STOCK)
Diamond Star - Saltwater Friendly
The Diamond Star Salt-Friendly pool incorporates all the latest technology and parts to make it an experience you will enjoy for a lifetime. Incorporating the resin top stabilizer rim allows for the use of salt and further reduces the chances of rust or corrosion. This pool is the best you can buy in the industry at a great price. Pools in local stores are double the price and fall short of the features we offer with this pool, including the 54” Aluminum wall, the 11” resin top seat, and 9” steel uprights. The Diamond Star pool has been one of our most popular models over the years and this is the first year we are offering this upgrade since more and more customers are asking for salt pools. If you purchase the Diamond Star Salt-Friendly pool you will not be disappointed.
- Wall Height: 54" Wall height
- Top Seats: 11" Resin Top Seat
- Liner: 30 mil Unibead Metal Diamond or Mystri Gold Liner
- Wall: Aluminum Wall
- Frame: Resin Stabilizer Top Rim
- Install:Narrow Yard Oval Install
- Track:Resin Injected Bottom Track
- Warranty: Manufacturers Lifetime Warranty - 3 years full warranty
|One-piece Aluminum Wall|
|Weather Resistant Polyester Base Paint plus Clear Krystal Kote on outside of wall - locks out corrosion, discoloration and dirt|
|Liquilock Epoxy Wall Backer on inside of wall to prevent condensation buildup|
|54" Wall Height|
|11" extra-wide Resin injected Top Seat (radius)|
|9" Multi-faceted, patterned, Krystal Kote sealed Steel Uprights|
|Two-Piece injection molded high impact Resin Caps- two tone accent|
|Resin Stabilizer Top Rim|
|Heavy Duty Injection molded Resin Bottom Track*|
|Snap-In one-piece Resin Bottom Cuff (no hardware)|
|Resin accent "grill" clips snap into bottom cuffs and top caps|
|Pool wall and frame are gray tones in color|
Lifetime manufacturers warranty with three-year full warranty
Warrantied for Salt use
|Available in Round and Oval Sizes|
|All Diamond Star round pools require a minimum of one foot clearance around pool|
|Oval Pools have a Yardmore/Narrow Yard Space Saving Design - require 18" clearance on sides|
|All prices include shipping|
|Installation not included|
|Made in the USA|
|*12'x24' Oval Pool has an Aluminum Track due to radius|
A week to 10 days before beginning installation you need to verify you have all your parts. All pool boxes should be opened and compared to the packing list to verify nothing is missing or damaged. Parts list are included on the CD in your pool box, the packing list within each box and are listed in this section.
You can contact an installer in your area or install the pool yourself. However, if you are considering installing the pool yourself, please review both the manual instructions and installation video in this section. We do not offer installation or installation advice, you are purchasing the kit only.
You can connect all the hoses and unions that come with your system (seen below) or you can hard plumb the system (in the next section).
To hard plumb your pump and filter system you will need to purchase some items from a local hardware store:
- PVC pipe
- Elbow joints
- Flow-thru valves
You will need to cut the PVC pipe to fit between the parts, and then make the connections as shown below.
To install your overlap liner follow the directions that came in your liner box, use the directions below as a reference.
Use the directions that come in your liner box and in your pool instructions, use the instructions below as a reference.
If you are using a unibead liner, these liners can be hooked on the wall or you can remove the J portion on the top of the liner and then feed the bead that is on the liner into the bead receiver. We do not sell bead receivers. Also, if you are installing a replacment liner make sure your bead receiver is in good condition or the liner could slip out when the water is added.
When your liner is installed, you need to fill the pool with 1-2 feet of water before cutting installing your skimmer and return. In addtion you do not want to cut the hole in the liner until the skimmer plate and backside are installed and you cut on the inside of the skimmer.
Once your pool is filled for the first time or you finish adding water when you open your pool in the spring, you can take a water sample to a local pool store and get them to test your water and tell you what you need to add or you can use the test kit that was provided to determine what needs to be added before you start your chemical maintenance program. All water should be checked and balanced before any chlorine or salt is added.
You will need a closing chemical kit and a winter cover.
OVAL installation video
ROUND installation video
Pre-assembly for TRADITIONAL BUTTRESS supports
Pre-assembly for BUTTRESS-FREE supports